Missed LTL Pick-Ups: Key Ways to Get Your Freight on the Road

09/15/2021 — Jen Deming

Question: what’s worse than your LTL shipment running late for delivery? Answer: How about when your shipment isn’t picked up to begin with? Missed LTL pick-ups are a unique shipping challenge because the trouble occurs before the shipment even hits the road. Regardless whether you’re the shipper or the receiver, freight that’s left on the dock can mean delivery delays, playing phone-tag with the carrier, and a few other headaches. 

Missed pick-ups are very common in LTL freight shipping, even more so as demand increases and capacity shrinks. They usually occur when errors are made scheduling a shipment, or if a pick-up location is unprepared or inflexible regarding the carrier’s arrival. Sometimes, it’s due to a carrier running late because other shippers ran overtime. The good news is that many missed pick-ups are avoidable and there are steps you can take to ensure your freight gets loaded. We’ve broken down key ways to get your freight moving so missed freight pick-ups aren’t as common.

Understand your carrier’s pick-up schedule

The first step to avoiding missed LTL pick-ups is understanding how a carrier operates. Carriers typically complete deliveries in the morning, and only after those are completed are new loads picked up throughout the afternoon. Carriers create a plan of action early when scheduling pick-ups and deliveries. Missed pick-ups commonly occur when a shipper tries to squeeze it in too late in the day as an attempt to get a jump on transit. In most cases, it’s extremely difficult to get an LTL shipment picked up the same day. If your warehouse has early close times, this makes pick-ups even more difficult, and you’ll likely see a “freight not ready” designation when tracking your freight status.

To ensure your shipment gets moving, be realistic in your timelines and give the carrier 24 hours’ notice. Respect how a freight carrier must operate to complete their schedule. The more you accommodate the carrier, the more likely they are to be flexible with you, as well. 

Request special services at the time of scheduling

Special services that are necessary to complete a pick-up are often missed when scheduling with the carrier. For example, if you don’t have a dock or proper loading equipment, you’ll need a liftgate. They are often available, but they are not standard on every freight truck. The carrier must be notified when scheduling so the proper truck is dispatched. The same goes for businesses with tricky locations categorized as "limited access". Should you need a pup or box truck, this must be mentioned to the carrier, because smaller, more maneuverable trucks are harder to find. 

If you’re arranging the shipment, but aren’t the pick-up location, make sure you find out from your shipper whether or not they will need these special services. Mention and confirm these requests when scheduling with the carrier. If this is missed, another pick-up is not likely to be attempted the same day. Instead your carrier will return the next business day.

Get a confirmation number and ETA 

When you complete a scheduled pick-up successfully, either by phone or online, you will always be given a confirmation number. This number is a simple way to ensure everything was scheduled correctly and you’re “on the board”, a carrier term for scheduled and set to dispatch. The confirmation number contains a code that is unique to certain carriers. At the time of scheduling, you may receive an ETA from the driver. The ETA can help the shipper prepare for arrival, so a pick-up runs smoothly.

When scheduling your pick-up, be sure to note the confirmation code and double-check that it’s accurately representing your chosen carrier. Share this number with whomever will be a part of the pick-up process, so that if there are any delays, you can confirm that it was scheduled correctly.

Create flexibility in your warehouse operating hours

As a general rule of thumb, the more open you are, the better for the carrier. And we mean that literally. Truck drivers are constantly combating delays during transit, whether due to traffic, weather, or even being held up at another location. Time is money, especially in trucking. A simple delay can interrupt a day’s worth of pick-ups, and trouble can snowball quickly. 

By extending hours through weekends, or adding as-needed late or early shifts to your warehouse, the carrier will have an easier time completing your pick-up. Keep in mind that the driver wants to check off all of their scheduled stops, so they don’t carry over into the next day. By expanding your dock hours when needed, they will complete their workload and you can rest easy knowing your freight’s moving. 

Prepare paperwork and prep the load before pick-up 

As we’ve mentioned, to keep on track, carriers must spend the least amount of time possible at each location. Common reasons a driver may be delayed are because the BOL and paperwork aren’t prepared, or the load isn’t packed and prepped in time. As the capacity crunch tightens, carriers are even less flexible than they have been in the past. If your location isn’t prepared, you can bet the driver will leave if you’re running too deep into detention time. 

Make sure that if you’re the shipper, you have all paperwork ready. If you are shipping special loads such as hazmat or cross-border freight, those required documents must be in order, as well. Also important, be sure that your freight is properly packaged and staged for easy loading. If you have especially fragile loads, and your packaging isn’t up to par, the driver may choose to leave the shipment due to the added risk.

Check specs to ensure available space on truck

An important point to note is that pallet count, weights, and dimensions aren’t just for calculating your shipping costs. In LTL shipping, you share the truck space with other customers’ loads. The specifications you provide determine rates, but also help the driver plan for what will fit on the truck. Proper measurements reveal how much space is left in the trailer for other shipments. Incorrect specs can throw off a driver’s schedule, preventing other customers from loading after you.

If a carrier decides your shipment’s specs are just too different from what was planned, you guessed it, they’ll leave it on the dock. Keep this in mind if you consider estimating freight dimensions or sneaking on any extra pallets that you have ready. Make sure your measurements and weight match what’s on your BOL. Surprises are great, but not for your arriving truck driver.

Concluding points

It’s important to remember that missed pick-ups are common and sometimes unavoidable. The silver lining, however, is that some are within your control. If you want smooth sailing for your LTL freight, review these best practices to start your shipment’s journey off right. 

As more warehouse teams have increasing responsibilities, tracking and managing pick-ups can take up tons of time. 3PLs like PartnerShip can help proactively check on your loads and find out why there may be any holdups – freeing up your time and to-do list.